Use American advanced water model and structural design. Adopt new techniques of    and , good product performance, long lifespan, high efficiency, high efficiency, higher than the domestic J, JD, JC type pump by 2-8%. Flat efficiency curve, and wide high efficiency area. The working scope is increased by 10-20% and the energy saving is effective. Whirl sand device is used and the maze-like structure makes sands not able to enter the bearings. The impeller shaft and motor shaft are supported by brass bearings. The radial runout is controlled within the American Standard 0.13, and the pump works steadily, with low noise. To meet the different kinds of working conditions and technical conditions, specially designed closed type drive system may be adopted, and nodular iron and different brands of stainless steel can be chosen.

Q: Max 2400m3/h

H: Max 250m

Application scope: water works, hydraulic power plant, heat power plant, iron and steel works, agricultural irrigation, fire protection, public works etc.

Use American advanced hydraulic model and structural design, epoxy coating of the blade runner, CNC machine tool processes all kinds of parts, good product performance, and long span of life. High efficiency, higher than domestic QJ type pumps by 2-8%. Flat yield curve, wide high-efficiency, the working condition increases by 10-20%, effective energy saving. To wells with high sediment concentration, anti-sand structure and equipment can be used. 

Q: Max 1100m3/h

H: Max 420 m

Fluid temperature: -30℃～120 ℃

Application scope: water works, hydroelectric station, fire power station, iron and steel works, agricultural irritation, fire protection, public works etc.

Q: Max 340m3/h

H: Max 150 m

Fluid temperature: -30℃～120 ℃

Application scope: water supply, heat supply air-conditioning system, fire supercharge system, spray, spay and irritation, boiler water supply, industrial medium transportation, car washing equipment etc.

Q: Max 18,000m3/h

H: Max 100 m

Fluid temperature: -10℃～150 ℃

Working pressure: Max 25 bar

Application scope: water supply system, water treatment system, boiler water supply system, cleaning system, factory technological water system, and fire extinguishing system.

Performance and merit: water industry, irrigation system, water drainage plant, electric station, industrial water supply, fire protection etc.

Q: Max 120m3/h

H: Max 330m

Fluid temperature: -30℃～120 ℃

Working pressure: Max 40 bar

Application scope: water supply system, water treatment system, boiler water supply system, cleaning system, factory technological water system, and fire extinguishing system.

Performance and merit: 304/316L two materials, multiple water outlet and inlet combination configuration, wide scope, pipeline design, high efficiency, liable quality, easy servicing.

Q: Max 72m3/h

H: Max 247m

Fluid temperature: 10℃～90 ℃("S" type and "N" type)、-10℃～60 ℃("E" type)

Working pressure: Max 26 bar

Application scope: water supply system, water treatment system, boiler water supply system, cleaning system, factory technological water system, and fire extinguishing system

Performance and merit: 304/316L two materials, multiple water outlet and inlet combination configuration, wide scope, pipeline design, high efficiency, liable quality, easy servicing.

Q: Max 240m3/h

H: Max 110m

Fluid temperature: -10℃～110 ℃

Working pressure: Max 12 bar

Application scope: cool water circulation, water treatment system, water supply and pressure charging, chemical fluid transportation, cleaning equipment, and air-conditioning system.

Performance and merit: all 316L, wide power range, high efficiency, liable quality, easy servicing.

Q: Max 30m3/h

H: Max 62m

Fluid temperature: -10℃～110 ℃

Working pressure: Max 8bar

Application scope: pressure-charging, household water supply, cooling system, air-conditioning system, garden irritation, cleaning equipment, food and beverages.

Performance and merit: compact structure, low noise, high efficiency, convenient installation.

Q: Max 54m3/h

H: Max 30m

Fluid temperature: -10℃～110 ℃

Working pressure: Max 8bar

Grain diameter: Max 20mm

Application scope: part cleaning, tool cooling fluid circulation, commercial bowl-washing machine, food technology

Performance and merit: anti-erosion, easy servicing, convenient installation.

Q: Max 7.8m3/h

H: Max 60m

Fluid temperature: -10℃～110 ℃

Working Pressure: Max 8bar

Application scope: Household water delivery pressure-charging, garden spray, minitype water supply set, minitype central air-conditioner

Performance and merit: anti-erosion, compact structure, convenient installation

Q: Max 220m3/h

H: Max 95m

Fluid temperature: -20℃～120 ℃

Working pressure: Max 12bar

Application scope: community heat system, air-conditioning system, cooling system, cleaning system, and other industrial system

Performance and merit: wide application scope, standard generator

Q: Max 190m3/h

H: Max 90cm

Fluid temperature: -20℃～110 ℃

Working pressure: Max 12bar

Application scope: liquid transportation, industrial cleaning, supply water with increased pressure, cold and hot water circulation of air-conditioner.

Performance and merit: wide application area, standard generator, used in all kinds of situations

Q: Max 40m3/h

H: Max 20m

Fluid temperature: 0℃～35 ℃

Grain diameter: Max 10-50mm

Q : Max 100m/h

H : Top 20m  

Liquid Temperature: 0℃～50 ℃

Grain Diameter : 65mm 

Application scope: containing particles, fibers effluent, emit large quantities of underground sewage and water emissions 
Performance and merits : simple installation and easy maintenance, and able to move large particles

Q: 10-1250m3/h  

H: Top 100m above

Shell pump with gray casting iron or stainless steel precision casting. 

Impeller uses stainless steel precision casting, precision brass foundry manufacturing silicon, clean, resistant to abrasion and corrosion.  Well pump, variable frequency control cabinets, electrical, piping and the base are integrated designed to facilitate the roll-ground pipeline and construction

Q : Max 420m3/h

H : Top 28m the highest lift

Liquid temperature : 25 ° C to 40 ° C 

Grain diameter : 30-100mm 

Application scope : containing particles, fibers effluent, emit large quantities of underground sewage and water emissions  

Q : The biggest 78m3/h  

H : 410m above the highest lift  

Liquid temperature: 0 ° C to 40 ° C

Maximum diving depth : 350m  

Largest concentration :25g/m3  

Application Scope : the extraction of groundwater, agriculture, irrigation, steel / Power Plant, domestic water supply  

G type: electrically controlled water supply unit

GMD type: frequency conversion controlled water supply unit

GHV type: total intelligence frequency conversion controlled water supply unit

Application scope: high-rise building pressurization water supply, fire hydrant and spay of fire extinguishing system, air-conditioning hot and cold water cycle, expansion water tank, water works, pressurization pump station, boiler water supply, purified water equipment, water supply system, agricultural irritation, and drainage system of all kinds of industrial and mining establishments (chemical industry, food, manufacture, brewery )

Pumpsmart and Hydrovar are a frequency device automatically applied to the control of any centrifugal pump.  

One-phase:1.1-2.2kw

Three-phase: 2.2-400kw.  

XBD of ITT Goulds Pump Company is in accordance with China's latest GB6245-1998 standards promulgated by the "fire pump performance requirements and test methods" which were developed by the introduction of low pressure fire pump products to meet the market needs. Fire equipment products are done the modelling test by the China Quality Supervision and Inspection Center; the performance indexes of all the various standards are met, and get the certification of fire protection products.

This series of products are mainly for the mining industry, such as construction of high-rise buildings and fixed fire extinguishing system of fire hydrants, automatic sprinkler systems and other fire and for the transportation of solid particles of water and non-chemical properties similar to the water medium, but also for the life and production share to the municipal water system and construction of drainage, etc.

  XRD-fire pump units are divided into vertical multi-stage centrifugal pump unit, horizontal multi-stage centrifugal pumps, horizontal absorption end pump unit, vertical long axis pump, well submersible pump unit, packing or mechanical seal are available to meet the needs of different users.

XBC Fire Long Axis Centrifuge Well Pump Unit of ITT Goulds Pumps (Nanjing) Co., Ltd. are created by the Chinese standard GB 6245-1998 in accordance with the "fire pump performance requirements and test methods" and the United States Fire Protection Association standards developed by the introduction of NFPA20 Fire Pump. Fire equipment products are done the modelling test by the China Quality Supervision and Inspection Center; the performance indexes of all the various standards are met, and get the certification of fire protection products.

Long Axis Fire Pump Unit consists of a number of centrifugal impeller and diversion carcasses, lifting pipes, drive shaft, pump base, gear case, diesel engine assembly, control cabinet, pump base and gear case etc.

The diesel engine assembly lies at the wellhead; the power of the diesel engine assembly is passed through the drive shaft which is concentric of the gear case and lifting pipe, to have a flow and pressure.